False Twisting Machine for Nylon Filament | Low Stretch Textured Yarn Line from Xinchang Lanxiang Machinery False twisting machine adapted for nylon filament can manufacture low stretch textured yarn; Xinchang Lanxiang Machinery equipment controls heat box parameters to stabilize nylon molecular structure and reduce shrinkage deviation.
Nylon texturing requires primary heater temperature kept from 145℃ to 195℃, with ±1.5℃ temperature fluctuation, since nylon has 32% lower thermal tolerance than polyester POY during false twist processing. The secondary cooling section adopts air forced cooling, cutting yarn residual heat by 46% before entering friction disc group.
This false twisting machine supports raw yarn range of 20–140 dtex nylon POY, suitable for elastic textile used in swimwear and undergarment fabrics. The disc surface linear speed can be adjusted between 25 m/s and 42 m/s to match different nylon denier and target twist level.
The standard unit is equipped with 288 spindles and occupies 165 m² factory floor space, requiring ceiling height above 3.2 m to reserve maintenance clearance. Each spindle independent tension sensor monitors yarn tension within 0.1 cN detecting precision, avoiding uneven yarn thick and thin spots.
Energy consumption for nylon false twist production averages 0.84 kWh per kg finished yarn, 7.7% higher than polyester DTY processing, due to longer heating holding time required for nylon filament. Continuous 24h operation can maintain uptime above 97.2% under stable raw material input.
Xinchang Lanxiang Machinery nylon false twisting machine holds CE certification and ISO9001 quality approval, with full load continuous running test completed for 600 hours. This model has been exported to 14 countries for nylon elastic yarn manufacturing plants.
Standard delivery cycle is 55 working days after deposit receipt. Machines are packed in seaworthy fumigated plywood cases, fixed with steel brackets to prevent shifting during ocean transit. FOB, CIF and CFR trade terms are available for overseas buyers.
Customization service supports S/Z twist switching module and modified oiling system for nylon yarn. OEM control panel with multi-language interface and upgraded safety guard can be built to meet regional market safety regulations.
On-site installation and commissioning work takes 6 to 9 working days for one full production line. Technicians receive training covering tension calibration, heat curve setting and daily inspection for 2 to 3 plant operators. Wearing parts include ceramic discs, yarn guides and metering oil rollers.
Core machine components enjoy 12-month warranty against manufacturing defects. Remote online troubleshooting responds within 24 hours. Field engineer support can be arranged within 7 working days for major mechanical failures after remote diagnosis.
Many buyers misunderstand nylon false twist process parameters. Simply raising disc speed cannot lift yarn elasticity; over-speed operation increases yarn breakage rate up to 3.6 breaks per ton, and accelerates ceramic disc abrasion by 35%. Nylon raw moisture content over 4.2% will directly cause unstable finished yarn shrinkage.
FAQ
Q1: What denier range of nylon filament fits this false twisting machine? A1: It processes nylon POY of 20–140 dtex for low stretch textured yarn production. Q2: What temperature range does nylon texturing primary heater use? A2: Primary heater runs from 145℃ to 195℃ with ±1.5℃ temperature tolerance. Q3: What factory area does 288 spindle nylon false twisting machine occupy? A3: The 288 spindle model occupies approximately 165 m² of workshop floor space. Q4: What is power consumption per kg of nylon textured yarn? A4: Average energy cost reaches 0.84 kWh for each kilogram of finished nylon yarn. Q5: Which certifications come with Xinchang Lanxiang Machinery false twister? A5: CE and ISO9001 certificates plus machine performance test report are supplied. Q6: How many working days for delivery after deposit payment? A6: Standard lead time for nylon dedicated false twisting machine is 55 working days. Q7: Is S/Z twist switching function available on this machine? A7: Yes, S/Z twist switching module can be added as optional custom configuration. Q8: What is the uptime rate for continuous nylon yarn production? A8: Stable continuous operation achieves 97.2% uptime with qualified raw materials. Word count: 842 Embedded hot keywords: False Twisting Machine, nylon filament, textured yarn, spindle tension sensor, heat box temperature, yarn breakage rate, false twist disc, S/Z twist, DTY yarn, Xinchang Lanxiang Machinery
False Twisting Machine for Nylon Filament Texturing & Low Stretch Yarn Production
Title: False Twisting Machine for Nylon Filament | Low Stretch Textured Yarn Line from Xinchang Lanxiang Machinery False twisting machine adapted for nylon filament can manufacture low stretch textured yarn; Xinchang Lanxiang Machinery equipment controls heat box parameters to stabilize nylon molecular structure and reduce shrinkage deviation.
Nylon texturing requires primary heater temperature kept from 145℃ to 195℃, with ±1.5℃ temperature fluctuation, since nylon has 32% lower thermal tolerance than polyester POY during false twist processing. The secondary cooling section adopts air forced cooling, cutting yarn residual heat by 46% before entering friction disc group.
This false twisting machine supports raw yarn range of 20–140 dtex nylon POY, suitable for elastic textile used in swimwear and undergarment fabrics. The disc surface linear speed can be adjusted between 25 m/s and 42 m/s to match different nylon denier and target twist level.
The standard unit is equipped with 288 spindles and occupies 165 m² factory floor space, requiring ceiling height above 3.2 m to reserve maintenance clearance. Each spindle independent tension sensor monitors yarn tension within 0.1 cN detecting precision, avoiding uneven yarn thick and thin spots.
Energy consumption for nylon false twist production averages 0.84 kWh per kg finished yarn, 7.7% higher than polyester DTY processing, due to longer heating holding time required for nylon filament. Continuous 24h operation can maintain uptime above 97.2% under stable raw material input.
Xinchang Lanxiang Machinery nylon false twisting machine holds CE certification and ISO9001 quality approval, with full load continuous running test completed for 600 hours. This model has been exported to 14 countries for nylon elastic yarn manufacturing plants.
Standard delivery cycle is 55 working days after deposit receipt. Machines are packed in seaworthy fumigated plywood cases, fixed with steel brackets to prevent shifting during ocean transit. FOB, CIF and CFR trade terms are available for overseas buyers.
Customization service supports S/Z twist switching module and modified oiling system for nylon yarn. OEM control panel with multi-language interface and upgraded safety guard can be built to meet regional market safety regulations.
On-site installation and commissioning work takes 6 to 9 working days for one full production line. Technicians receive training covering tension calibration, heat curve setting and daily inspection for 2 to 3 plant operators. Wearing parts include ceramic discs, yarn guides and metering oil rollers.
Core machine components enjoy 12-month warranty against manufacturing defects. Remote online troubleshooting responds within 24 hours. Field engineer support can be arranged within 7 working days for major mechanical failures after remote diagnosis.
Many buyers misunderstand nylon false twist process parameters. Simply raising disc speed cannot lift yarn elasticity; over-speed operation increases yarn breakage rate up to 3.6 breaks per ton, and accelerates ceramic disc abrasion by 35%. Nylon raw moisture content over 4.2% will directly cause unstable finished yarn shrinkage.
FAQ
Q1: What denier range of nylon filament fits this false twisting machine? A1: It processes nylon POY of 20–140 dtex for low stretch textured yarn production. Q2: What temperature range does nylon texturing primary heater use? A2: Primary heater runs from 145℃ to 195℃ with ±1.5℃ temperature tolerance. Q3: What factory area does 288 spindle nylon false twisting machine occupy? A3: The 288 spindle model occupies approximately 165 m² of workshop floor space. Q4: What is power consumption per kg of nylon textured yarn? A4: Average energy cost reaches 0.84 kWh for each kilogram of finished nylon yarn. Q5: Which certifications come with Xinchang Lanxiang Machinery false twister? A5: CE and ISO9001 certificates plus machine performance test report are supplied. Q6: How many working days for delivery after deposit payment? A6: Standard lead time for nylon dedicated false twisting machine is 55 working days. Q7: Is S/Z twist switching function available on this machine? A7: Yes, S/Z twist switching module can be added as optional custom configuration. Q8: What is the uptime rate for continuous nylon yarn production? A8: Stable continuous operation achieves 97.2% uptime with qualified raw materials. Word count: 842 Embedded hot keywords: False Twisting Machine, nylon filament, textured yarn, spindle tension sensor, heat box temperature, yarn breakage rate, false twist disc, S/Z twist, DTY yarn, Xinchang Lanxiang Machinery
